Rush-Overland 40 MBTU Trailer Mounted Frac Water Heater Unit
Trailer Features:
- Heavy Duty Drop Deck Tri-Axle Trailer
- (12) 11R24.5 tires
- (6) Polished Aluminum Outer Wheels, (6) Steel Inner Wheels
- 75,000 Air Ride Suspension
- Rear Enclosure with Full Width Roll Up Doors to Cover Engine, Pump, and Manifold
- Trailer Neck Driver Side Walkway
Burner Features:
- Rush LPG Fired Updraft Type Burner
- 40,000,000 Btu Input
- Direct Spark Ignition
- Stainless Steel Burner Tips
ASME Code Section IV Heat Exchanger:
- 3" Multi-Pass Heat Exchanger Contracted of SA106B Seamless Tubing
Burner Chamber:
- 1/4" Steel Plate Outer Walls
- Ceramic Fiber Insulation Rated at 2,300 Degrees Per Layer
- Insulated Burner Chamber Top
- Stainless Steel Rooster Cone
Fuel Storage Tank:
- (1) 2865 Gallon LPG Tank DOT MC331
- Shut-Off Valve and In-Line Filters Located on Driver's Side for Easy Access and Maintenance
- Electric Drive Blackmer LPG Pump
Control Panel:
- Water Tight Control Panel with Full Viewing Plexi-Glass Window
- Water Discharge Temperature Indicator with a High Temperature Shutdown
- Two Low Flow Safety Switches to Shut Down Burner if Water Flow is Lost
- Work Light Switches with Indicator Lights
- Control Panel Light Switch with Indicator Light
- Coil Outlet Pressure Gauge
- All Controls Will be Labeled Appropriately
Centrifugal Pump:
- 5 x 3 Vacuum Assisted Self Priming Centrifugal Pump
- Mechanically Driven
Manifold System:
- 4" Schedule 40 Manifold Piping and Butterfly Valves
- Eight 4" Brass Camlock Connections
Power Plant:
- Cummins Diesel Engine Model QSB4.4
- Positive Air Shut-Off System
- Air Actuated Twin Disc Clutch
- Oil Pan Heater
- Water Cooled
- Steel Enclosure with Side Mounted Doors
- 120 Gallon Aluminum Fuel Tank (Heated Traced and Insulated)
- Main Battery Disconnect Switch
Miscellaneous:
- 20 kW Generator
- Electric Driven Air Compressor with Insulated Enclosure
- Five Large Toolboxes Mounted Around Unit
- Hose Basket Mounted Under Unit on Passenger Side to Hold 4" Suction Hose
- E.D. Work lights Mounted Around Unit for Night Operation
- Unit will be Sandblasted to meet NACE 1/SSPC-SP5 Specifications before Electro-Statically Applying 3 Coats of Corrosion Resistant Epoxy Primer and 2 Coats of Acrylic Urethane Enamel Paint
Gallery
no images were found
Rush-Overland 24 MBTU Truck Mounted Frac Water Heater Unit
- Unit is Constructed on 10" I-Beam Frame with 10" I-Beam Crossmembers
- 5" Channel Outriggers
- 1/4" Floor Plate
Burner Features:
- Rush LPG Fired Updraft Type Burner
- 24,000,000 Btu Input
- Direct Spark Ignition
- Stainless Steel Burner Tips
Heat Exchanger:
- ASME SECTION IV
- 3" SA106 Grade B Seamless Tubing
- The Heat Exchanger is Constructed in a Six Pass Arrangement and is Fed by a 4" Header which Separates the Flow Into Six Paths Through the Coils
Burner Chamber:
- 1/4" Steel Plate Outer Walls
- Ceramic Fiber Insulation Rated at 2,300 Degrees Per Layer
- Insulated Burner Chamber Top
- Stainless Steel Rooster Cone
Fuel Storage Tank:
- (1) 2000 Gallon LPG Tank DOT MC331
- Shut-Off Valve and In-Line Filters Located on Driver's Side for Easy Access and Maintenance
Control Panel:
- Water Tight Control Panel with Full Viewing Plexi-Glass Window
- Watlow Series 93 Temperature Controller to Monitor Outlet Temperature and High Temperature Shutdown
- Low Flow Safety Switches to Shut Down Burner if Water Flow is Lost
- Electronic Speed Controller for Centrifugal Pump
- Work Light Switches with Indicator Lights
- Control Panel Light Switch with Indicator Light
- Coil Outlet Pressure Gauge
- Hydraulic System Pressure Gauge
- All Controls Will be Labeled Appropriately
Centrifugal Pump:
- 5 x 3 Vacuum Assisted Self Priming Centrifugal Pump
- Hydraulically Driven
Hydraulic System:
- 120 Gallon Hydraulic Reservoir with Cleanouts on each end
- Level Indicator/Temperature Gauge Combination Mounted in Tank for Hydraulic Fluid Monitoring
- Hydraulic Filters and Shut Off Valves Mounted on Passenger Side for Easy Access and Maintenance
- Axial Piston Sundstrand Hydraulic Pump to Drive Sundstrand Axial Piston Hydraulic Motor on Centrifugal Pump
- Four Wire Hydraulic Hose on All Pressure Lines
- One Wire Hydraulic Hose on All Return Lines
- One Muncie PTO to Drive Hydraulic Pump
Manifold System:
- 4" Schedule 40 Manifold Piping and Butterfly Valves
- Eight 4" Brass Camlock Connections with Dust Caps
Paint Rig-Up:
- Unit will be Sandblasted to meet NACE 1/SSPC-SP5 Specifications before Electro-Statically Applying 3 Coats of Corrosion Resistant Epoxy Primer and 2 Coats of Acrylic Urethane Enamel Paint
Miscellaneous:
- Three Large Toolboxes Mounted Around Unit
- E.D. Work lights Mounted Around Unit for Night Operation
- Epoxy Sealed Rubber Grimmet Mounted LED Tail Lights and Clearance Lights
- Unit Will be Sandblasted, Primed and Electro-Statically Painted to Customer's Specifications
Rush-Overland 38 MBTU Trailer Mounted Tri-Fuel Frac Water Heater Unit
Trailer Features:
- Heavy Duty Drop Deck Tri-Axle Trailer
- (12) 11R24.5 tires
- (6) Polished Aluminum Outer Wheels, (6) Steel Inner Wheels
- 75,000 Air Ride Suspension
Burner Features:
- Hauk Tri-Fuel Burner (Diesel, Propane, Natural Gas)
- 38,000,000 Btu Input
- Combustion Air Blower
- CSA Compliant
ASME Code Section IV Heat Exchanger:
- 3" SA106 Grade B Seamless Tubing
- The Heat Exchanger is Constructed in a Two Pass Arrangement and is Fed by a 4" Header
Burner Chamber:
- 1/4" Steel Plate Outer Walls
- Three Layers of Ceramic Fiber Insulation Attached to the Walls, Four Layers Attached to the Insulation is Rated at 2,300 Degrees Per Layer
- Insulated Burner Chamber Top
Fuel Storage Tank:
- (1) 2000 Gallon Diesel Fuel Tank
- Heaters in Fuel Tank
Control Panel:
- Water Tight Control Panel
- Fireye Flame Management System
- High Temperature Shut-Down System
- Two Low Flow Safety Switches to Shut Down Burner if Water Flow is Lost
- Work Light Switches
- All Controls Will be Labeled Appropriately
Centrifugal Pump:
- 5 x 3 Centrifugal Pump
- Priming Pump Masport Vacuum Pump
- Hydraulically Driven
Hydraulic System:
- Hydraulic Reservoir with Cleanouts on each end
- Level Indicator/Temperature Gauge Combination Mounted in Tank for Hydraulic Fluid Monitoring
- Hydraulic Filters and Shut Off Valves Mounted on Passenger Side for Easy Access and Maintenance
- Axial Piston Sundstrand Hydraulic Pump to Drive Sundstrand Axial Piston Hydraulic Motor on Centrifugal Pump
- Four Wire Hydraulic Hose on All Pressure Lines
- One Wire Hydraulic Hose on All Return Lines
Manifold System:
- 4" Schedule 40 Manifold Piping and Butterfly Valves
- 4" Brass Camlock Connections
Power Plant:
- Cummins Diesel Engine
- Positive Air Shut-Off System
- Water Cooled
- Steel Enclosure with Side Mounted Doors
- Main Battery Disconnect Switch
Paint:
- Unit will be Sandblasted to meet NACE 1/SSPC-SP5 Specifications before Electro-Statically Applying 3 Coats of Corrosion Resistant Epoxy Primer and 2 Coats of Acrylic Urethane Enamel Paint
Miscellaneous:
- 20 kW Generator
- Electric Driven Air Compressor with Insulated Enclosure
- Large Toolboxes Mounted Around Unit
- Hose Basket Mounted Under Unit on Passenger Side
- Work lights Mounted Around Unit for Night Operation