Hot Oil Units

Rush-Overland Hot Oil Units are designed to your specifications. Available in both the Lone Star Edition for warm weather and the Rocky Mountain edition for cold weather.

Gallery

Hot Oil Truck Variants

Rush 75 Barrel Hot Oil Unit - Lone Star Edition

  • Unit is Constructed on 10" I-Beam Cross Members
  • 5" Channel Outriggers
  • 1/4" Floor Plate
  • Unit is Recessed between Burner Chamber and Storage Tank for Easy Access to the Controls, Manifold System, and Pumps
  • Viking and Bowie Pumps are Mounted on the Outside of the Unit Frame for Easy Maintenance
  • Rush Easy Access Lubrication System will Simplify Daily Lubrication of all Pumps

Burner Features:

  • Rush LPG Fired Up-Draft Burner with Mild Steel Tips
  • Burner is Rated At 7,000,000 BTU Input and 5,800,000 BTU Output
  • Direct Spark Ignited
  • Water Heated Propane Vaporizer with Steel Coils
  • Propane Pre-Heater inside Burner Box
  • 48" Tool Box Mounted on Each Side of Burner Box

Heat Exchanger Consist Of:

  • 84 - 2" Schedule 80 SA-106 Seamless Tubing
  • Top Two Layers Thermo Finned for Greater Efficiency
  • One Pass Arrangement
  • Direct Fired
  • Hydro Tested to 2,000 PSI

Burner Chamber Is Constructed Of:

  • 1/4" Outer Walls
  • Two Layers Of Ceramic Fiber Insulation Rated At 2,300 Degrees Per Layer
  • Remote Fire Prevention System within Burner Chamber
  • Inspection Door on Drivers Side
  • Insulated Burner Box Top with Stainless Steel Rooster Cone

Control Panel Consists Of:

  • Water Tight Stainless Steel Control Box With Viewing Plexi-Glass Window and Removable Door
  • Panel Power Switch with Indicator Light
  • Burner Igniter Switch
  • Murphy High/Low Temperature Gauge with Burner Safety Shut-Down and Reset Switch
  • Murphy High/Low Pressure Gauge with Engine Shut-Down and Reset Switch
  • 60 lb. Propane Burner Pressure Gauge
  • 600 lb. Coil Pressure Gauge
  • 10,000 lb. Discharge Pressure Gauge
  • Pulsation Dampener Valves for Gauge in Control Panel
  • Coil Inlet and Outlet Temperature Gauges on Manifold
  • Engine Start Switch
  • Engine Throttle Switches
  • Engine Tachometer
  • Engine Water Temperature Gauge
  • Engine Oil Pressure Gauge
  • Air Clutch
  • Electric Over Air Shift PTO Control for Viking, Bowie, and Triplex
  • Work Light Switches
  • Panel Lights Mounted inside Control Box for Night Operation
  • Remote Control for Fire Prevention System in Heater
  • Pilot Igniter Push-Button Switch
  • Sight Glass Washer Switch
  • All Instruments, Switches, and Controls will be Properly Labeled

75 BBL Single Compartment Tank Constructed Of:

  • 3/16" Tank Walls, Heads, and Baffles
  • 12" Sump
  • Sight Glass Level Indicator and Cock with Sight Glass Protectors and Barrel Markers Mounted on Drivers Side of Tank
  • Access Ladder Mounted on Driver's Side of Tank with Full Length Walkway
  • Vent Box with 3" Vent Pipe
  • Two Manways on Top of Tank
  • Hose Rack (Single) Mounted On Rear of Unit
  • Hose Storage Built into Unit Skid
  • Pipe Rack with Locking Doors on Passenger Side of Unit to Hold Eight Aluminum 1-1/2" x 13' Joints of Schedule 80 Discharge Lines with Unions
  • Rear Mounted Discharge Swing Joint with Two 6,000 lb. Swivels
  • 3" Loading Connections on Sides and Rear of Unit with Brass Quick Couplers
  • 2" Washout Connection on Rear of Tank with Butterfly Valve and Brass Quick Coupler
  • Two 25 Gallon Chemical Tanks Built into Rear of Unit
  • One Kerosene Tank on Passenger Side with Transfer Pump Valved to Sight Glass for Cleaning
  • Four LED Flooded Lights for Night Operation

High Pressure Pump:

Download Spec Sheet
  • 165 TEE Triplex Pump
  • 3" Colomony Plungers
  • 5" Stroke
  • High Pressure Cast Steel Fluid Ends For Well Service
  • Hard Steel Valve Seats
  • Heavy Duty Universal Joints and Chain Drive
  • All Necessary Manifold to Connect Pump

TEEF 3X5 Well Servicing Performance Rating

RPMGPMPSI
50236,222
100465,226
200922,613
2501152,090
3001381,742

Feed Pump:

  • 3" Viking Pump
  • 4 Speed Transmission
  • Mechanical Drive

Load Pump:

  • 3" Bowie Pump
  • Mechanical Drive

3" Manifold System:

  • Schedule 40 SA-106 Seamless Pipe and Fittings
  • 3" Butterfly Valves
  • 3" Brass Camlocks and Plugs

2" Low Pressure Manifold:

  • Schedule 80 SA-106 Seamless Pipe and Fittings
  • Three 2" Jamesbury Ball Valves with 300-Degree Seats
  • 2" Check Valve
  • 1" Pressure Relief Valve (Set at 250 psi.)

2" High Pressure Manifold:

  • Schedule 160 SA-106 Seamless Pipe and Fittings
  • Two 6,000 psi. Ball Valves with High Temperature Seals
  • One 6,000 psi. Check Valve with High Temperature Seals
  • One 5,000 psi. Pressure Relief Valve

Other:

  • Spicer 784 Auxiliary Transmission to Drive Triplex Pump
  • Eight Aluminum 1-1/2" x 13' Joints of Schedule 80 Discharge Pipes with Hammer Unions
  • Discharge Pipe will be Tested and Banded
  • 50' of 3" Loading Hose With Camlock Connections
  • Two 48" Locking Tool Boxes at Rear of Unit
  • One Tool Box Mounted between Cab and Unit
  • Two 250 Gallon LPG Tanks Stacked and Mounted on Rear of Unit
  • Propane System will be Certified, Tagged and Licensed through the Texas Railroad Commission - License #0879
  • One 30 lb. Dry Chemical Fire Extinguisher Mounted at Rear of Unit
  • Tow Hook on Rear of Unit
  • Sandblast and Paint to Customer's Specification

Rush 75 Barrel Hot Oil Unit - Rocky Mountain Edition

  • Unit is Constructed on 10" I-Beam Cross Members
  • 5" Channel Outriggers
  • 1/4" Floor Plate
  • Unit is Recessed between Burner Chamber and Storage Tank for Easy Access to the Controls, Manifold System, and Pumps
  • Centrifugal and Bowie Pumps are Mounted on the Outside of the Unit Frame for Easy Maintenance
  • Rush Easy Access Lubrication System will Simplify Daily Lubrication of All Pumps

Burner Features:

  • Rush LPG Fired Up-Draft Burner with Stainless Steel Tips
  • Burner Is Rated At 7,000,000 BTU Input and 5,800,000 BTU Output
  • Direct Spark Ignited
  • Water Heated Propane Vaporizer with Steel Coils
  • Propane Pre-Heater Inside Burner Box
  • 48" Tool Box Mounted on Each Side of Burner Box
  • Auto Temperature Control

Heat Exchanger:

  • 84 - 2" Schedule 80 SA-106 Seamless Tubing
  • Top Two Layers Thermo Finned for Greater Efficiency
  • One Pass Arrangement
  • Direct Fired
  • Hydro Tested to 2,000 PSI

Burner Chamber:

  • 1/4" Outer Walls
  • Two Layers of Ceramic Fiber Insulation Rated at 2,300 Degrees Per Layer
  • Remote Fire Prevention System Within Burner Chamber
  • Inspection Door on Drivers Side
  • Insulated Burner Box Top with Stainless Steel Rooster Cone

Control Panel:

  • Fully Enclosed Water Tight Stainless Steel Control Box with Viewing Plexi-Glass Window
  • Panel Power Switch with Indicator Light
  • Burner Igniter Switch
  • Murphy High/Low Temperature Gauge with Burner Safety Shut-Down and Reset Switch
  • Murphy High/Low Pressure Gauge with Engine Shut-Down and Reset Switch
  • 60 Propane Burner Pressure Gauge
  • (1) 600 Coil Pressure Gauge in Panel and (1) Gauge on Manifold
  • (1) 10,000 Discharge Pressure Gauge in Panel and (1) Gauge on Manifold
  • Pulsation Dampener Valves for Gauge in Control Panel
  • Coil Inlet and Outlet Temperature Gauges on Manifold
  • Engine Start and Throttle Switches
  • Engine Water Temperature Gauge, Engine Oil Pressure Gauge, and Tachometer
  • Truck Air Pressure Gauge
  • Air Clutch
  • Electric Over Air Shift PTO Control for Centrifugal, Bowie, and Triplex
  • Lights Power Switch
  • Work Light Switches
  • Panel Lights Mounted inside Control Box for Night Operation
  • 600 Low Pressure Gauge on Triplex Suction
  • Triplex Oil Pressure Gauge in Control Panel
  • 784 Spicer Transfer Case Temperature Gauge
  • Remote Control for Fire Prevention System in Heater
  • All Instruments, Switches, and Controls will be Properly Labeled
  • Flow Meter with Digital Readout

75 BBL Double Compartment (35 Front - 40 Rear) Oval Tank:

  • 3/16" Tank Walls, Heads, and Baffles
  • 12" Sumps
  • Two Stainless Steel Float Level Indicators
  • Access Ladder Mounted on Driver's Side of Tank with Full Length Walkway
  • Vent Box with 3" Vent Pipe for Each Compartment
  • Two Manways on Top of Tank with Crows Nest and Four 1" Drain Hoses
  • Hose Rack (Double) Mounted On Rear of Unit With Built-in Toolbox
  • Hose Storage Built into Unit Skid
  • Pipe Rack with Locking Doors on Drivers Side of Unit to Hold Eight Steel 1-1/2" x 13' Joints of Schedule 80 Discharge Lines with Unions
  • Folding Rails on Drivers Side Bed for Additional Hose Storage
  • Rear Mounted Discharge Swing Joint With Two 6,000 Swivels
  • 3" Loading Connections on Sides and Rear of Unit with Brass Quick Couplers
  • 2" Recirculation Line to the Rear of the Unit Plumbed Into Both Holding Tanks
  • LED Flooded Lights For Night Operation
  • Service Tank Internally Coated

High Pressure Pump:

Download Spec Sheet
  • Gardner Denver TEE Triplex Pump 
  • 3" Colomony Plungers
  • 5" Stroke
  • High Pressure Cast Steel Fluid Ends For Well Service
  • Hard Steel Valve Seats
  • 3 Drain Valves Located on Bottom of Suction Header with Suction Gauge
  • 1610 Spicer Driveline with Heavy Duty Universal Joints and Chain Drive

Feed Pump:

  • 3" x 2" Centrifugal Pump
  • Speed Increaser
  • Mechanical Drive

Load Pump:

  • 3" Bowie Pump
  • Mechanical Drive

3" Manifold System:

  • Schedule 40 SA-106 Seamless Pipe and Fittings
  • Bowie Isolation Valve
  • 3" Butterfly Valves - 11 Total
  • 3" Brass Camlocks and Plugs
  • Flooded Suction for Triplex with Low Point Drain

2" Low Pressure Manifold:

  • Schedule 80 SA-106 Seamless Pipe and Fittings
  • Four 2" Jamesbury Ball Valves with 300-Degree Seats
  • 2" Check Valve
  • 1" Pressure Relief Valve (Set at 250 psi.)

2" High Pressure Manifold:

  • Schedule 160 SA-106 Seamless Pipe and Fittings
  • Two 6,000 psi. Ball Valves with High Temperature Seals
  • One 6,000 psi. Check Valve with High Temperature Seals
  • One 5,000 psi. Pressure Relief Valve

Other:

  • Spicer 784 Auxiliary Transmission to Drive Triplex Pump
  • Eight Steel 1-1/2" x 13' Joints of Schedule 80 Discharge Pipes with Hammer Unions
  • 50' of 3" Loading Hose With Camlock Connections
  • Two 48" Heavy Duty Locking Tool Boxes at Rear of Unit
  • Two 36" Heavy Duty Tool Boxes Mounted between Cab and Unit
  • Lights in all Tool and Locker Boxes
  • Two 250 Gallon LPG Tanks Stacked and Mounted on Rear of Unit
  • One 30 Dry Chemical Fire Extinguisher Mounted at Rear of Unit
  • Pipe Vice Receiver Mount Located on Drivers Side at Rear of Unit
  • Recessed Tow Hook in Rear Bumper
  • Dual Recessed License Plate Holder and Light in Rear Tail Board
  • Unit will be Sandblasted to meet NACE 1/SSPC-SP5 Specifications before Electro-Statically Applying 3 Coats of Corrosion Resistant Epoxy Primer and 2 Coats of Acrylic Urethane Enamel Paint
 

Have any questions?

Email us Call Now